Home > Product > Aluminum Truck Wheels > 19.5 Aluminum Wheels

19.5 Aluminum Truck Wheels

Brand: TELSUN Wheel Size: 19.5x6.75 Rim Diameter: 19.5” Rim Width: 6.75” Center Bore Dia: 176mm Bolt Circle: 225mm Bolt Hole: 10 Bolt Dia: 26mm Offset: ET142 Finish: Machine finished/Polished/Dura-Bright Max. Load: 2500KGS Application: Truck/Trailer Material: T6061 Packing: Pallet/Carton Product...
Product Details:

Brand: TELSUN

Wheel Size: 19.5x6.75

Rim Diameter: 19.5”

Rim Width: 6.75”

Center Bore Dia: 176mm

Bolt Circle: 225mm

Bolt Hole: 10

Bolt Dia: 26mm

Offset: ET142

Finish: Machine finished/Polished/Dura-Bright

Max. Load: 2500KGS

Application: Truck/Trailer

Material: T6061

Packing: Pallet/Carton


Aluminum alloy wheels are made of aluminum alloy. Compared with traditional steel wheels, they have the following advantages:

1. Good heat dissipation: The heat transfer coefficient of aluminum alloy is three times larger than that of steel. The friction between the tire and the ground and between the brake disc and the brake pad during the running of the car generates a very high heat, which causes the tire and the brake pad to age and accelerate the wear, and the braking performance is drastically reduced due to the high temperature. Tire pressure will also increase there is a puncture hazard. Compared to steel rims, aluminum alloy wheels can conduct this heat more quickly into the air, increasing the safety factor.

2. Light weight: The proportion of aluminum alloy wheels is smaller than that of steel wheels. Each one is about two kilograms lighter than a steel wheel of the same size. In addition to the spare wheels, a total weight loss of eight kilograms can be achieved. A lighter rim can also reduce the starting and acceleration resistances. Both work together to make the vehicle more fuel efficient.

3. High precision: The precision of aluminum alloy wheel casting is much higher than that of steel wheels, and the out-of-roundness and unbalanced weight are small. In addition, the aluminum alloy has small elastic modulus and better vibration resistance than steel wheels. These two advantages can effectively reduce vehicle vibration and make driving more comfortable.

4. More beautiful: aluminum alloy in the liquid state of high temperature has better fluidity and tension than steel wheels. The post-polishing and electroplating process makes it possible to produce a more aesthetically pleasing appearance. Surface anti-corrosion treatment and electrostatic powder coating also make it new.


Product Specifications

Wheel Size

Max.load KG

Offset(mm)

Disc Thickness

Stud Hole Dia (mm)

Number of Stud Holes

Centre Bore Dia (mm)

P.C.D (mm)

Mounting Type

Dual Mount

19.5X6.75

2500

142

22.1

32.5

6

164

222.25

Stud

YES

19.5X6.75

2500

142

22.1

26

10

176

225

Hub

YES

19.5X6.75

2500

142

22.1

26

6

202

245

Hub

YES

19.5X6.75

2500

142

22.1

26

8

221

275

Hub

YES


Product Display:

3.jpg


Packing details:

Alloy wheel maintenance method:

1. When the hub temperature is high, you should allow it to cool naturally before cleaning. Do not use cold water. Otherwise, it will damage the aluminum alloy hub and even cause the brake disc to deform and affect the braking effect. In addition, cleaning the aluminum alloy hub with a cleaning agent at a high temperature will cause a chemical reaction on the surface of the hub, which will lose its luster and affect the appearance.

2. When the hub is stained with hard-to-clear asphalt, if the general cleaning agent does not help, use a brush to try to clear, but do not use a hard brush, especially iron brush, so as not to damage the hub surface. Here, the private car owners are introduced to a remedy for the removal of tar, that is, the use of medicinal active oil to rub, can get unexpected results.

3. If the area where the vehicle is located is wet or close to the waterfront, the wheel hub should be cleaned frequently to avoid salt corrosion on the aluminum surface.

4. After cleaning, the hub can be waxed and maintained to make its luster permanent.


Hot Tags: 19.5 aluminum truck wheels, China, manufacturers, suppliers, factory, cheap, for sale
Related Products
Feedback: